SWTC17G11 Replacement Parts

Two lower enclosure straight tubes made from galvanized steel.

Lower Enclosure Straight Tube (Set of 2)

One lower enclosure straight tube made out of rust-resistant galvanized steel.

Lower Enclosure Straight Tube

Two piles of six foam sleeves.

Enclosure Foam (Set of 12)

Self-tapping screw.

Self Tapping Screws - Qty 26

Spring puller to assist during assembly.

The enclosure tube is made out of galvanized steel.

Upper Enclosure Curved Tube

Kit with 2 end caps, 2 bolts, and 2 blue pole caps.

Large Blue Pole Cap Kit with Bolts and End Caps (Set of 2) 8017, 1016, 8003

Two green pole caps facing opposite directions.

Pole Cap - Green - Qty 2

Two poles and two foam sleeves.

Enclosure Pole Kit (Set of 1) 4135; 4077; 5067

M5x50 mm bolt as seen from the front.

M5x50 mm Bolt - Qty4

Six blue pole caps, six black end caps, and six bolts in lines angled to the right.

Large Blue Pole Cap Kit with Bolts and End Caps (Set of 6) 8017, 1016, 8003

Two blue pole caps.

Pole Cap - Blue - Qty 2

Replacement V-ring.

V-Rings - Qty 12

Two tubes in the enclosure pole kit.

Upper & Lower Enclosure Pole Kit (1 Set) 4135 & 4077

The oval enclosure net comes with three latch clips for additional security on the trampoline.

17' Oval Enclosure Net

Kit with bolts, screws, and six blue pole caps.

Large Blue Pole Cap Kit (Set of 6) with 32 Screws 8017, 1016, 1005

Pile of twelve 7-inch-long springs stacked on top of each other.

7" Springs - Qty 12

The jump mat designed for the 17-foot oval trampoline has 96 V-rings.

17' Oval Jump Mat with 96 V-Rings

Pole Cap - Red - Qty 2