STRC1400 Replacement Parts

Two lower enclosure straight tubes made from galvanized steel.

Lower Enclosure Straight Tube (Set of 2)

One lower enclosure straight tube made out of rust-resistant galvanized steel.

Lower Enclosure Straight Tube

Two piles of six foam sleeves.

Enclosure Foam (Set of 12)

Self-tapping screw.

Self Tapping Screws - Qty 26

Spring puller to assist during assembly.

The enclosure tube is made out of galvanized steel.

Upper Enclosure Curved Tube

Kit with 2 end caps, 2 bolts, and 2 blue pole caps.

Large Blue Pole Cap Kit with Bolts and End Caps (Set of 2) 8017, 1016, 8003

8-foot by 14-foot rectangle polyethylene enclosure net.

8'x14' Rectangle Enclosure Net

Two green pole caps facing opposite directions.

Pole Cap - Green - Qty 2

Two poles and two foam sleeves.

Enclosure Pole Kit (Set of 1) 4135; 4077; 5067

M5x50 mm bolt as seen from the front.

M5x50 mm Bolt - Qty4

Six blue pole caps, six black end caps, and six bolts in lines angled to the right.

Large Blue Pole Cap Kit with Bolts and End Caps (Set of 6) 8017, 1016, 8003

Two blue pole caps.

Pole Cap - Blue - Qty 2

Green, UV-resistant spring pad for 8 by 14 foot trampolines.

8'x14' Rectangle Spring Pad - Green

Replacement V-ring.

V-Rings - Qty 12

Two tubes in the enclosure pole kit.

Upper & Lower Enclosure Pole Kit (1 Set) 4135 & 4077

12 galvanized steel springs with included spring puller.

5.5" Springs - 0.9" Diameter - Qty 12 with Spring Puller

Kit with bolts, screws, and six blue pole caps.

Large Blue Pole Cap Kit (Set of 6) with 32 Screws 8017, 1016, 1005

Silver and white M6 nut.

M6 Cap Nut - Qty 4